FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • B002E52

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

  • Make sure that the front seatback frame sub-assembly is not deformed. If it is, replace it with a new one.

Tech Tips


  • Use the same procedures for the driver and front passenger sides.

  • The procedure listed below is for the driver side.

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY


    1. B002D2J

      Install the front seat airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the clamps.

    3. B002C7Q

      Engage the clamps and claw.

  2. INSTALL SEATBACK COVER WITH PAD

    Click here

  3. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  4. INSPECT SRS WARNING LIGHT

    Click here