FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. A01XQYKC01
      *a Connector Lock

      Connect the 2 airbag connectors.

      Note


      • When connecting any airbag connector, take care not to damage the airbag wire harness.

      • Be sure to only connect the connectors to each corresponding color.

    2. Push in the 2 connector locks to install the 2 airbag connectors.

    3. Engage the clamp.

  2. INSTALL INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY


    1. B002D0S

      Engage the rear hooks.

    2. Engage the front hooks.

    3. Install the 2 screws to install the instrument panel passenger without door airbag assembly.

  3. INSTALL NO. 3 HEATER TO REGISTER DUCT

    Click here

  4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

    Click here

  5. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  6. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  7. INSPECT SRS WARNING LIGHT

    Click here