METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.


        Warning
        Tester Display Description Default Setting ECU
        Flasher Sound Volume Adjustment Function to change the flasher sound volume Small 10:Large,00:Medium,01:Small Combination meter assembly

        Display
        Tester Display Description Default Setting ECU
        ECO Drive Indicator Zone Function to change the ECO Drive Indicator Zone ON 0:OFF,1:ON Combination meter assembly
        ODO Display Time After IG OFF Setting Function to change the ODO display time after the engine switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly
    2. Customizing with the combination meter assembly


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Settings.

      3. Select the setting by referring to the table below.

        Meter Setting
        Display Default Content Setting Relevant ECU
        Language English Function to change the multi-information display language English, French, Spanish, German*1, Italian*1, Russian*1, Chinese*2 Combination meter assembly
        Units

        miles (MPG)*3

        km (L/100km)*3

        km (km/L),*3

        Function to change the multi-information display unit miles (MPG), km (km/L), km (L/100km) Combination meter assembly
        ECO drive indicator ON Function to turn on/off the eco drive indicator light On or Off Combination meter assembly
        Switch Settings - Function to change the screen assigned to the TOP button on the steering pad switch assembly - Combination meter assembly
        Drive Info 1 Current Fuel Economy (Bar Type), Average Fuel Economy (After Reset) Function to change the item to be displayed on Drive Info 1 Current Fuel Economy (Bar Type), Average Fuel Economy (After Reset, After Start, After Refuel), Average Speed (After Reset, After Start), Elapsed Time (After Reset, After Start), Distance (Range, After Start), Other (Blank) Combination meter assembly
        Drive Info 2 Distance (Range), Average Speed (After Reset) Function to change the item to be displayed on Drive Info 2 Current Fuel Economy (Bar Type), Average Fuel Economy (After Reset, After Start, After Refuel), Average Speed (After Reset, After Start), Elapsed Time (After Reset, After Start), Distance (Range, After Start), Other (Blank) Combination meter assembly
        Drive Info 3 Average Fuel Economy (After refuel), Elapsed Time (After Start) Function to change the item to be displayed on Drive Info 3 Current Fuel Economy (Bar Type), Average Fuel Economy (After Reset, After Start, After Refuel), Average Speed (After Reset, After Start), Elapsed Time (After Reset, After Start), Distance (Range, After Start), Other (Blank) Combination meter assembly
        Interrupt Display On Function to change the interrupt display setting of each item On or Off Combination meter assembly
        REV indicator On Function to turn on/off the REV indicator light On or Off Combination meter assembly
        REV Peek Function On Function to turn on/off the REV peek function On or Off Combination meter assembly
        Drive Mode Screen (The SPORT S mode) White ribbon type tachometer Function to change the "The SPORT S mode" White ribbon type tachometer, Digital type tachometer Combination meter assembly
        Drive Mode Screen (The SPORT S+ mode) Digital type tachometer Function to change the "The SPORT S+ mode" White ribbon type tachometer, Digital type tachometer Combination meter assembly
        Drive Mode Screen (The CUSTOMIZE mode) NORMAL mode Function to change the "The CUSTOMIZE mode" ECO Mode, NORMAL Mode, SPORT S Mode, SPORT S+ Mode Combination meter assembly
        Initialization - The setting items can be initialized - Combination meter assembly

        *1: Models for Europe

        *2: Except models for Europe

        *3: Differs depending on the country.