VANITY LIGHT SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE VISOR BRACKET COVER


    1. A01Q8BO

      Using a moulding remover A, disengage the claws to remove the visor bracket cover.

  2. REMOVE VISOR ASSEMBLY

    A01Q8T1C01
    B002C8N Remove in this Direction

    1. Remove the 2 screws.

    2. Disengage the guide.

    3. Remove the visor assembly as shown in the illustration.