AMBIENT LIGHT(for Rear Door) INSPECTION

PROCEDURE


  1. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. A01QAXNC07
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly LH)

      Check that the LED illuminates.


      1. Apply battery voltage to the No. 1 interior illumination light assembly LH and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (+)

        Battery negative (-) → 2 (-)

        		 LED illuminates

        If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

  2. INSTALL NO. 1 INTERIOR ILLUMINATION LAMP ASSEMBLY RH


    1. A01QAXNC07
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly RH)

      Check that the LED illuminates.


      1. Apply battery voltage to the No. 1 interior illumination light assembly RH and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (+)

        Battery negative (-) → 2 (-)

        		 LED illuminates

        If the result is not as specified, replace the No. 1 interior illumination light assembly RH.