HEADUP DISPLAY SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Warm up the engine.

    2. Turn the engine switch off.

    3. Connect the GTS to the DLC3.

    4. Turn the engine switch on (IG).

    5. Turn the GTS on.

    6. Enter the following menus: Body Electrical / Head Up Display / Data List.

    7. Read the Data List according to the display on the GTS.


      Body Electrical > Head Up Display > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      +B Voltage Value Battery voltage Min.: 0 V, Max.: 25.5 V 11 to 14 V -
      Main Switch Headup display main switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      		 -
      Brightness Up Switch Brightness up switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      		 -
      Brightness Down Switch Brightness down switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      		 -
      Projection Position Up Switch Projection position up switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      		 -
      Projection Position Down Switch Projection position down switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      		 -
      Display Change Switch Display change switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      		 -
      Radar Cruise System Existence of function With or Without

      With: w/ Dynamic radar cruise control system

      Without: w/o Dynamic radar cruise control system

      		 -
      PCS System Existence of function With or Without

      With: w/ Pre-collision system

      Without: w/o Pre-collision system

      		 -
      LDA System Existence of function With or Without

      With: w/ LDA system

      Without: w/o LDA system

      		 -
      Road Sign Assist System Existence of function With or Without

      With: w/ Road sign assist system

      Without: w/o Road sign assist system

      		 -
      Navigation System Existence of function With or Without

      With: w/ Navigation system

      Without: w/o Navigation system

      		 -
      Vehicle Speed Meter Vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Almost the same as actual vehicle speed -
      Engine Rpm Engine speed Min.: 0 rpm, Max.: 12750 rpm Almost the same as actual tachometer -
      HV System Indicator Hybrid system indicator value Min.: -512%, Max.: 511% -512 to 511% *1

      • *1: Although the item is displayed on the GTS, it is not applicable to this vehicle.

  2. Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    ACTIVE TEST


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Head Up Display / Active Test.

    5. Perform the Active Test according the display on the GTS.


      Body Electrical > Head Up Display > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Color Test Screen Headup display OFF, Black, White, Red, Green, Blue, Color Bars, Adjustment -
      Display Brightness Headup display 0 to 100% -
      Display Position Headup display OFF, Pos 1, Pos 2, Pos 3, Pos 4, Pos 5, Pos 6, Pos 7, Pos 8 -