VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A01QBUVC01
      *a Protective Tape
      B002C8N Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide to separate the vanity light assembly as shown in the illustration.

    2. A01QBAB

      Disengage the claws to remove the vanity light assembly from the bulb holder.

  2. REMOVE VANITY LIGHT BULB

    Click here