LIGHTING SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE LIGHTING SYSTEM (INT)

   
   

   1. Customizing using the GTS

      Tech Tips

      The following items can be customized.

      Note

      
      

      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Illuminated Entry.

      5. Select the setting by referring to the table below.

         
         Illuminated Entry

         Tester Display	Description	Default	Setting	ECU
         Lighting Time	Changes the lighting time after closing all of the doors [It will fade out immediately when turning the engine switch from off to on (ACC) or on (IG)].	15 s	10:30 s,00:15 s,01:7.5 s	Main body ECU (Multiplex network body ECU)
         I/L when ACC OFF	A function that turns on the interior lights when the engine switch is turned from on (IG) or on (ACC) to off (the interior lights turn on when the map light switch is set to DOOR).	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
         I/L ON W/Door Key Unlock	A function that turns on the interior lights when the door is unlocked (the interior lights turn on when the map light switch is set to DOOR).	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
         Room Light when Aprchd	A function that turns on the room lights when the key is brought within the vehicle exterior detection area (the room lights turns on when the map light switch is set to DOOR).	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
         Inside Foot Light	Changes the interior foot lights control.	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
         Mirr-Foot-Lgt Approached/Exterior Light Approached	Lights up the door mirror foot lights when the key is brought within the vehicle exterior detection area.	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
         Mirr-Foot-Lgt Unlocked/Exterior Light Unlocked	Lights up the door mirror foot lights when the doors are unlocked using a mechanical key or door control transmitter.	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
         Mirror Foot Light Time/Exterior Light Time	Changes the lighting time of the door mirror foot lights.	15 s	00:15 s,01:7.5 s,10:30 s,11:0 s	Main body ECU (Multiplex network body ECU)
         Light Control	This function controls the interior foot lights, inside handle illumination and door ambient light.	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
         Interior Light Control	This function controls the interior lights.	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)

   2. Customizing using the accessory meter assembly*1 or multi-display*2

      
      

      • *1: w/ Navigation System

      • *2: w/o Navigation System

      
      

      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Light Settings.

      3. Select the setting by referring to the table below:

         Light Settings

         Display	Default	Content	Setting	Relevant ECU
         Interior Light Off Timer	15 sec.	This function controls the interior lights.	Off, 15 sec., 7.5 sec. or 30 sec.	Main body ECU (Multiplex network body ECU)
         Exterior Lights Off Time	15 sec.	This function controls the door mirror foot lights.	Off, 15 sec., 7.5 sec. or 30 sec.	Main body ECU (Multiplex network body ECU)