ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A01Q9EZ

      Engage the claws to install the No. 2 indoor electrical key antenna assembly.

      Note

      Be careful when installing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.

    2. Connect the connector.

    3. A01QBE3

      Engage the claw to close the cover.

    4. Return the floor carpet to its original position and install the 2 clips.

  2. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here