ELECTRICAL KEY OSCILLATOR(for Rear Floor) REMOVAL

PROCEDURE


  1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A01QBOT

      Using a clip remover, remove the 2 clips and pull back the floor carpet.

    2. A01QBE3

      Disengage the claw to open the cover.

    3. A01Q9EZ

      Disconnect the connector.

    4. Disengage the claws to remove the No. 2 indoor electrical key antenna assembly.

      Note

      Be careful when removing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.