AMBIENT LIGHT(for Front Door) INSPECTION

PROCEDURE

1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

   
   
   1. 

      *a	Component without harness connected (No. 1 Interior Illumination Light Assembly LH)

      Check that the LED illuminates.

      
      

      1. Apply battery voltage to the No. 1 interior illumination light assembly LH and check that the LED illuminates.

         OK
         Measurement Condition Specified Condition Battery positive (+) → 1 (+) Battery negative (-) → 2 (-) LED illuminates

         If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH

   
   
   1. 

      *a	Component without harness connected (No. 1 Interior Illumination Light Assembly RH)

      Check that the LED illuminates.

      
      

      1. Apply battery voltage to the No. 1 interior illumination light assembly RH and check that the LED illuminates.

         OK
         Measurement Condition Specified Condition Battery positive (+) → 1 (+) Battery negative (-) → 2 (-) LED illuminates

         If the result is not as specified, replace the No. 1 interior illumination light assembly RH.