INTEGRATION RELAY INSPECTION

PROCEDURE

1. INSPECT NO. 1 INTEGRATION RELAY

   
   
   1. 

      *a	Component without harness connected (No. 1 Integration Relay)

      IG2 RELAY

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 2D-1 - 2E-2 2D-1 - 2F-6 2D-1 - 2F-7 2D-1 - 2F-8 Battery voltage not applied between terminals 2E-5 - 2E-4 10 kΩ or higher Battery positive (+) → 2E-5 Battery negative (-) → 2E-4 Below 1 Ω Battery voltage not applied between terminals 2E-5 - 2E-16 10 kΩ or higher Battery positive (+) → 2E-5 Battery negative (-) → 2E-16 Below 1 Ω

   2. 

      *a	Component without harness connected (No. 1 Integration Relay)

      INJ2 RELAY

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection Condition Specified Condition 2D-1 - 2F-11 2D-1 - 2F-12 Battery voltage not applied between terminals 2E-8 - 2E-4 and 2D-1 - 2E-19 10 kΩ or higher Battery positive (+) → 2E-8 Battery negative (-) → 2E-4 and Battery positive (+) → 2D-1 Battery negative (-) → 2E-19 Below 1Ω Battery voltage not applied between terminals 2E-9 - 2E-4 and 2D-1 - 2E-19 10 kΩ or higher Battery positive (+) → 2E-9 Battery negative (-) → 2E-4 and Battery positive (+) → 2D-1 Battery negative (-) → 2E-19 Below 1 Ω Battery voltage not applied between terminals 2E-8 - 2E-16 and 2D-1 - 2E-19 10 kΩ or higher Battery positive (+) → 2E-8 Battery negative (-) → 2E-16 and Battery positive (+) → 2D-1 Battery negative (-) → 2E-19 Below 1 Ω Battery voltage not applied between terminals 2E-9 - 2E-16 and 2D-1 - 2E-19 10 kΩ or higher Battery positive (+) → 2E-9 Battery negative (-) → 2E-16 and Battery positive (+) → 2D-1 Battery negative (-) → 2E-19 Below 1 Ω

   3. 

      *a	Component without harness connected (No. 1 Integration Relay)

      INJ1 RELAY

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection Condition Specified Condition 2D-1 - 2F-4 2D-1 - 2F-5 Battery voltage not applied between terminals 2E-8 - 2E-4 and 2D-1 - 2E-19 10 kΩ or higher Battery positive (+) → 2E-8 Battery negative (-) → 2E-4 and Battery positive (+) → 2D-1 Battery negative (-) → 2E-19 Below 1 Ω Battery voltage not applied between terminals 2E-9 - 2E-4 and 2D-1 - 2E-19 10 kΩ or higher Battery positive (+) → 2E-9 Battery negative (-) → 2E-4 and Battery positive (+) → 2D-1 Battery negative (-) → 2E-19 Below 1 Ω Battery voltage not applied between terminals 2E-8 - 2E-16 and 2D-1 - 2E-19 10 kΩ or higher Battery positive (+) → 2E-8 Battery negative (-) → 2E-16 and Battery positive (+) → 2D-1 Battery negative (-) → 2E-19 Below 1 Ω Battery voltage not applied between terminals 2E-9 - 2E-16 and 2D-1 - 2E-19 10 kΩ or higher Battery positive (+) → 2E-9 Battery negative (-) → 2E-16 and Battery positive (+) → 2D-1 Battery negative (-) → 2E-19 Below 1 Ω

   4. 

      *a	Component without harness connected (No. 1 Integration Relay)

      EFI MAIN1 RELAY

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection Condition Specified Condition 2D-1 - 2E-3 2D-1 - 2E-4 2D-1 - 2E-13 2D-1 - 2E-14 2D-1 - 2E-15 2D-1 - 2E-16 2D-1 - 2E-19 Battery voltage not applied between terminals 2E-8 - 2E-4 10 kΩ or higher Battery positive (+) → 2E-8 Battery negative (-) → 2E-4 Below 1 Ω Battery voltage not applied between terminals 2E-9 - 2E-4 10 kΩ or higher Battery positive (+) → 2E-9 Battery negative (-) → 2E-4 Below 1 Ω Battery voltage not applied between terminals 2E-8 - 2E-16 10 kΩ or higher Battery positive (+) → 2E-8 Battery negative (-) → 2E-16 Below 1 Ω Battery voltage not applied between terminals 2E-9 - 2E-16 10 kΩ or higher Battery positive (+) → 2E-9 Battery negative (-) → 2E-16 Below 1 Ω

   5. 

      *a	Component without harness connected (No. 1 Integration Relay)

      A/F RELAY

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection Condition Specified Condition 2D-1 - 2F-10 Battery voltage not applied between terminals 2E-8 - 2E-4 10 kΩ or higher Battery positive (+) → 2E-8 Battery negative (-) → 2E-4 Below 1 Ω Battery voltage not applied between terminals 2E-9 - 2E-4 10 kΩ or higher Battery positive (+) → 2E-9 Battery negative (-) → 2E-4 Below 1 Ω Battery voltage not applied between terminals 2E-8 - 2E-16 10 kΩ or higher Battery positive (+) → 2E-8 Battery negative (-) → 2E-16 Below 1 Ω Battery voltage not applied between terminals 2E-9 - 2E-16 10 kΩ or higher Battery positive (+) → 2E-9 Battery negative (-) → 2E-16 Below 1 Ω Battery voltage not applied between terminals 2D-1 - 2E-4 10 kΩ or higher Battery positive (+) → 2D-1 Battery negative (-) → 2E-4 Below 1 Ω Battery voltage not applied between terminals 2D-1 - 2E-16 10 kΩ or higher Battery positive (+) → 2D-1 Battery negative (-) → 2E-16 Below 1 Ω