BLIND SPOT MONITOR SENSOR INSTALLATION

PROCEDURE

1. INSTALL BLIND SPOT MONITOR SENSOR LH

   
   

   1. Install the blind spot monitor sensor LH with the 3 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.

   2. Connect the connector.

2. INSTALL BLIND SPOT MONITOR SENSOR RH

   Tech Tips

   Use the same procedure as for the LH side.

3. INSTALL REAR BUMPER ASSEMBLY

   Click here

4. PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION

   Click here

   SST

   09870-60000   ( 09870-60010 )

   09870-60040