TELEVISION CAMERA REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the rear television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative when not Performed Link
Removal/installation of rear television camera assembly

  • Parking assist monitor system initialization

  • Rear television camera assembly optical axis (Back camera position setting)

 Parking assist monitor system

Click here

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  2. REMOVE REAR TELEVISION CAMERA ASSEMBLY


    1. A01QAIFC01
      B002DP3 Push

      Disconnect the connector.

    2. Disengage the claws to remove the rear television camera assembly.