TELEMATICS TRANSCEIVER INSTALLATION

PROCEDURE

1. INSTALL TELEMATICS TRANSCEIVER

   
   

   1. 

      Connect each connector.

   2. Install the telematics transceiver with the 3 bolts.

      Tech Tips

      Tighten the bolts in the order shown in the illustration.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

5. INSTALL FRONT DOOR OPENING TRIM COVER RH

   Click here

6. INSTALL FRONT DOOR SCUFF PLATE RH

   Click here

7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

   Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

10. CHECK SRS WARNING LIGHT

    Click here

11. REGISTRATION TELEMATICS TRANSCEIVER

    
    

    1. When replacing the multi-media module receiver assembly or telematics transceiver, perform the vehicle contract setting Click here.