NAVIGATION SYSTEM, Diagnostic DTC:B158C

DTC Code DTC Name
B158C SD Card Communication Malfunction

DESCRIPTION

The radio receiver assembly stores this DTC when the SD card (disc player disc) cannot be mounted when inserted into the SD card (disc player disc) slot.

DTC No. Detection Item DTC Detection Condition Trouble Area
B158C SD Card Communication Malfunction The SD card (disc player disc) cannot be mounted when inserted into the SD card (disc player disc) slot

  • SD card (disc player disc)

  • Radio receiver assembly

CAUTION / NOTICE / HINT

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed.

Click here

PROCEDURE


  1. CHECK SD CARD (DISC PLAYER DISC)


    1. Turn the engine switch off and remove the SD card (disc player disc) from the SD card (disc player disc) slot.

    2. Check that the SD card (disc player disc) is not damaged.

      Result
      Result Proceed to
      The SD card (disc player disc) is not damaged. A
      The SD card (disc player disc) is damaged. B

    B

    REPLACE SD CARD (DISC PLAYER DISC)

    A

  2. CLEAN COMPONENTS


    1. Check that the terminals of the SD card (disc player disc) are free of foreign matter. Remove foreign matter as necessary.

    2. Check that the SD card (disc player disc) slot of the radio receiver assembly is free of foreign matter. Remove foreign matter as necessary.

    3. Insert the SD card (disc player disc) into the SD card (disc player disc) slot.

      Result
      Proceed to
      NEXT

    NEXT

  3. CHECK DTC


    1. Clear the DTCs.

      Click here


      Body Electrical > Navigation System > Clear DTCs

    2. Recheck for DTCs and check that no DTCs are output.


      Body Electrical > Navigation System > Trouble Codes
      OK
      No DTCs are output.
      Result
      Proceed to
      OK
      NG

    OK

    END

    NG

  4. REPLACE SD CARD (DISC PLAYER DISC)


    1. Replace the SD card (disc player disc) with a new or known good one.

    2. Clear the DTCs.

      Click here


      Body Electrical > Navigation System > Clear DTCs

    3. Recheck for DTCs and check that no DTCs are output.


      Body Electrical > Navigation System > Trouble Codes
      OK
      No DTCs are output.
      Result
      Proceed to
      OK
      NG

    OK

    END

    NG

    REPLACE RADIO RECEIVER ASSEMBLY Click here