ASC ECU INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL STEREO COMPONENT EQUALIZER ASSEMBLY

   
   

   1. Install the stereo component equalizer assembly with the 2 bolts.

   2. Connect the connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

5. INSTALL FRONT DOOR OPENING TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

6. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

8. INSTALL INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

10. CHECK SRS WARNING LIGHT

    Click here