REAR PACKAGE TRAY SPEAKER INSTALLATION

PROCEDURE


  1. INSTALL REAR HEADER SPEAKER ASSEMBLY (w/ Mark Levinson Speaker System)

    Tech Tips


    • Use the same procedure for the RH and LH sides.


    • The procedure listed above is for the RH side.


    1. B002EHW

      Engage the clip to install the rear header speaker assembly.

    2. Install the bolt.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      Do not touch the cone of the speaker.

    3. Connect the connector.

  2. INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Mark Levinson Speaker System)

    Click here

  3. INSTALL REAR NO. 3 SPEAKER ASSEMBLY


    1. B002CP8E02

      Install the rear No. 3 speaker assembly with the 4 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Tech Tips

      Tighten the bolts in the order shown in the illustration.

    2. Connect the connector.

      Note

      Do not touch the cone of the speaker.

  4. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here