REAR DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY


    1. B002CTA

      Engage the clip to install the rear No. 2 speaker assembly.

      Note

      Do not touch the cone of the speaker.

    2. Install the screw.

    3. Connect the connector.

  2. INSTALL REAR SPEAKER ASSEMBLY


    1. Engage the claw to install the rear speaker assembly.

      A01QD8GC02
      *A w/o Mark Levinson Speaker System *B w/ Mark Levinson Speaker System

    2. Install the 3 screws.

      Note

      Do not touch the cone of the speaker.

      Tech Tips

      Tighten the screws in the order shown in the illustration.

    3. Connect the connector.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  4. INSTALL REAR DOOR HOLE COVER

    Click here

  5. INSTALL REAR ARMREST BASE UPPER PANEL SUB-ASSEMBLY

    Click here

  6. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG

    Click here