RADIO RECEIVER INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 3 screws.

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 screws.

  3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. B002COVC01
      B002C8N Install in this Direction

      Push in the direction indicated by the arrows in the illustration, engage the claws and clips to install the radio receiver assembly with bracket.

      Note

      When inserting the radio receiver assembly with bracket, do not press the knobs on it.

    3. Install the radio receiver assembly with bracket with the 2 screws.

  4. INSTALL INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  6. PARKING ASSIST MONITOR SYSTEM INITIALIZATION

    Click here