AUDIO AND VISUAL SYSTEM(for 8 Inch Display), Diagnostic DTC:B1575

DTC Code DTC Name
B1575 GVIF Disconnected (from EMV/MM Integrated Device to Multi Display)

DESCRIPTION

The radio receiver assembly and multi-display are connected via a video signal (digital) line.

This DTC is stored when a video signal (digital) line is disconnected.

DTC No. Detection Item DTC Detection Condition Trouble Area
B1575 GVIF Disconnected (from EMV/MM Integrated Device to Multi Display) Video signal (digital) is lost

  • Harness or connector

  • Radio receiver assembly

  • Multi-display

WIRING DIAGRAM


  1. B002DN0E72
    *a Multi-display
    *b Radio Receiver Assembly
    *c Video Signal (Digital)

CAUTION / NOTICE / HINT

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed.

Click here

PROCEDURE


  1. REPLACE HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - MULTI-DISPLAY)


    1. Replace the harness and connectors.

    2. Clear the DTCs.

      Click here


      Body Electrical > Navigation System > Clear DTCs

    3. Recheck for DTCs and check that no DTCs are output.


      Body Electrical > Navigation System > Trouble Codes
      OK
      No DTCs are output.
      Result
      Proceed to
      OK
      NG

    OK

    END

    NG

  2. REPLACE MULTI-DISPLAY


    1. Replace the multi-display with a new or known good one.

      Click here

    2. Clear the DTCs.

      Click here


      Body Electrical > Navigation System > Clear DTCs

    3. Recheck for DTCs and check that no DTCs are output.


      Body Electrical > Navigation System > Trouble Codes
      OK
      No DTCs are output.
      Result
      Proceed to
      OK
      NG

    OK

    END

    NG

    REPLACE RADIO RECEIVER ASSEMBLY Click here