STEERING PAD SWITCH INSTALLATION

PROCEDURE

1. INSTALL STEERING PAD SWITCH ASSEMBLY

   
   

   1. Engage the 2 claws and 2 pins to install the steering pad switch assembly to the steering wheel sub-assembly.

   2. Install the 2 screws.

      Torque:

      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

   3. Connect the steering pad switch connector to the No. 1 switch wire.

   4. w/o Steering Wheel Vibration:

      
      

      1. Engage the steering pad switch connector clamp to the lower steering wheel boss cover.

   5. Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.

2. INSTALL CRUISE CONTROL MAIN SWITCH

   Click here

3. INSTALL HORN BUTTON ASSEMBLY

   Click here