BRAKE MASTER CYLINDER(for LHD) DISASSEMBLY

PROCEDURE


  1. REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN


    1. Secure the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. A01QAI5

      Using a 5 mm pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.

      Note

      Do not drop the brake master cylinder reservoir assembly.

  2. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. Remove the brake master cylinder reservoir assembly from the brake master cylinder assembly.

  3. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. A01QD9N

      Remove the 2 master cylinder reservoir grommets from the brake master cylinder assembly.

    2. Remove the brake master cylinder assembly from the vise.

  4. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  5. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER