FRONT SPEED SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

  • If the front speed sensor rotor needs to be replaced, replace the front axle hub sub-assembly.

  • The front speed sensor is a component of the front axle hub sub-assembly. If the front speed sensor is malfunctioning, replace the front axle hub sub-assembly.

PROCEDURE


  1. INSTALL FRONT AXLE HUB SUB-ASSEMBLY

    Click here

    Tech Tips


    • If the front speed sensor rotor needs to be replaced, replace the front axle hub sub-assembly.

    • The front speed sensor is a component of the front axle hub sub-assembly. If the front speed sensor is malfunctioning, replace the front axle hub sub-assembly.

  2. INSPECT FRONT AXLE HUB BEARING LOOSENESS

    Click here

  3. INSPECT FRONT AXLE HUB RUNOUT

    Click here

  4. INSTALL FRONT DISC

    Click here

  5. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

    Click here

  6. INSTALL FRONT SKID CONTROL SENSOR WIRE


    1. for LH Side:


      1. Connect the connector to install the front skid control sensor wire LH.

      2. Install the sensor clamp to the vehicle body with the bolt.

        Torque:
        6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

        Note

        Do not twist the front skid control sensor wire when installing it.

      3. Engage the clamp to the front No. 1 stabilizer bracket LH.

        Note

        Do not twist the front skid control sensor wire when installing it.

    2. for RH Side:


      1. Connect the connector to install the front skid control sensor wire RH.

      2. Install the sensor clamp to the vehicle body with the bolt.

        Torque:
        6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

        Note

        Do not twist the front skid control sensor wire when installing it.

      3. Engage the 2 clamps to the front No. 1 stabilizer bracket RH and vehicle body.

        Note

        Do not twist the front skid control sensor wire when installing it.

    3. Return the front fender liner to its original position.

    4. Install the 2 sensor clamps to the front shock absorber assembly and vehicle body with the 2 bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

      Note

      Do not twist the front skid control sensor wire when installing it.

    5. Install the sensor clamp to the steering knuckle with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      Do not twist the front skid control sensor wire when installing it.

    6. Connect the front skid control sensor wire connector to the front axle hub sub-assembly.

      Note

      Do not twist the front skid control sensor wire when installing it.

    7. Connect the pad wear indicator wire connector to the front skid control sensor wire.

      Note

      Do not twist the pad wear indicator wire when installing it.

  7. INSTALL FRONT FENDER LINER


    1. Install the front fender liner with the screw.

  8. INSTALL FRONT WHEEL

    Click here

  9. CHECK FOR SPEED SENSOR SIGNAL

    Click here