FRONT SPEED SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
If the front speed sensor rotor needs to be replaced, replace the front axle hub sub-assembly.
The front speed sensor is a component of the front axle hub sub-assembly. If the front speed sensor is malfunctioning, replace the front axle hub sub-assembly.

PROCEDURE

REMOVE FRONT WHEEL

Click here
SEPARATE FRONT FENDER LINER
1. Remove the screw and separate the front fender liner.
REMOVE FRONT SKID CONTROL SENSOR WIRE
1. *1 Pad Wear Indicator Wire
  
  *2 Front Skid Control Sensor Wire
  
  Disconnect the pad wear indicator wire connector from the front skid control sensor wire.
2. Disconnect the front skid control sensor wire connector from the front axle hub sub-assembly.
3. Remove the bolt and sensor clamp from the steering knuckle.
4. Remove the 2 bolts and 2 sensor clamps from the front shock absorber assembly and vehicle body.
5. Turn back the front fender liner.
6. for LH Side:
  1. Disengage the clamp from the front No. 1 stabilizer bracket LH.
  2. Remove the bolt and sensor clamp from the vehicle body.
  3. Disconnect the connector to remove the front skid control sensor wire LH.
7. for RH Side:
  1. Disengage the 2 clamps from the front No. 1 stabilizer bracket RH and vehicle body.
  2. Remove the bolt and sensor clamp from the vehicle body.
  3. Disconnect the connector to remove the front skid control sensor wire RH.
SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY

Click here
REMOVE FRONT DISC

Click here
REMOVE FRONT AXLE HUB SUB-ASSEMBLY

Click here
Tech Tips
- If the front speed sensor rotor needs to be replaced, replace the front axle hub sub-assembly.
- The front speed sensor is a component of the front axle hub sub-assembly. If the front speed sensor is malfunctioning, replace the front axle hub sub-assembly.

*1	Pad Wear Indicator Wire
*2	Front Skid Control Sensor Wire