VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1433

DTC Code DTC Name
C1433 Steering Angle Sensor Internal Circuit

DESCRIPTION

The skid control ECU (brake actuator assembly) outputs this DTC when it receives an internal malfunction signal from the steering angle sensor (spiral cable with sensor sub-assembly).

DTC No. Detection Item DTC Detection Condition Trouble Area Note
C1433 Steering Angle Sensor Internal Circuit With the +BS terminal voltage 9.5 to 17.4 V, the skid control ECU receives an error signal from the steering sensor. Steering angle sensor (spiral cable with sensor sub-assembly) -

PROCEDURE


  1. REPLACE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY


    1. Replace the steering angle sensor (spiral cable with sensor sub-assembly).

      Click here

      Tech Tips

      If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

    END