DESCRIPTION
The speed sensor rotors have rows of alternating N and S magnetic poles. The speed sensors use the frequency of output pulses to detect the vehicle speed. Because the sensor outputs digital pulses, it can detect the vehicle speed even when the vehicle is nearly stationary.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1411 | Rear Speed Sensor RH Performance | A reverse signal continues for 5 seconds or more when the vehicle speed is 3 km/h (1.9 mph) or more. | Rear speed sensor RH |
| C1412 | Rear Speed Sensor LH Performance | A reverse signal continues for 5 seconds or more when the vehicle speed is 3 km/h (1.9 mph) or more. | Rear speed sensor LH |
Tech Tips
DTC C1411 for the rear speed sensor RH.
DTC C1412 for the rear speed sensor LH.
PROCEDURE
RECONFIRM DTC
Clear the DTCs.
Turn the engine switch off.
Start the engine.
Perform a road test.
Check if the same DTC is output.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
USE SIMULATION METHOD TO CHECK Click here |
| B |
|
REPLACE REAR SPEED SENSOR Click here |