TIRE PRESSURE WARNING INITIATOR(for Rear Side) INSTALLATION

PROCEDURE

1. INSTALL REAR TIRE PRESSURE MONITOR INITIATOR

   
   

   1. Install the rear tire pressure monitor initiator with the 2 nuts.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

   2. Engage the grommet.

   3. Install the rear wheel house liner LH to its original position.

   4. Connect the connector.

2. INSTALL REAR WHEEL LH

   Click here

3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

   Click here

4. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here