TIRE PRESSURE WARNING RECEIVER(for Quarter Pillar) INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

   
   
   1. 

      *a	for bolt A
      *b	for bolt B

      Install the tire pressure warning ECU and receiver with the bolt.

      Torque:

      for bolt A

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      for bolt B

      9.5 N*m  { 97 kgf*cm, 84 in.*lbf }

   2. Connect the connector.

2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH (w/ Rear Sunshade)

   Click here

3. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH (w/o Rear Sunshade)

   Click here

4. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

5. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

6. INSTALL REAR SEAT ASSEMBLY

   Click here

7. REGISTER TRANSMITTER ID

   Click here

8. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here

9. PERFORM INITIALIZATION

   Click here