FRONT LOWER BALL JOINT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT LOWER BALL JOINT ASSEMBLY


    1. Secure the front lower suspension arm assembly in a vise using aluminum plates.

      Note

      When using a vise, do not overtighten it.

    2. A01QAYFC02
      *a Arrow

      Install the front lower ball joint assembly to the front lower suspension arm assembly with the nut.

      Torque:
      125 N*m  { 1275 kgf*cm, 92 ft.*lbf }

      Note


      • Prevent oil from adhering to the threaded and tapered parts.

      • Install the front lower ball joint assembly so that the arrows are facing towards the inside of the vehicle.

    3. Install a new clip.

      Note

      Further tighten the nut up to 60° if the holes for the clip are not aligned.

  2. INSTALL FRONT LOWER SUSPENSION ARM ASSEMBLY

    Click here