REAR ACCELERATION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL REAR ACCELERATION SENSOR ASSEMBLY


    1. A01XPXL

      Install the rear acceleration sensor assembly with the bolt.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      Note


      • Avoid any impact to the acceleration sensor.

      • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

      • The acceleration sensor must not be placed upside down.

    2. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER RH

    Click here

  3. INSPECT ADAPTIVE VARIABLE SUSPENSION SYSTEM

    Click here