FRONT ACCELERATION SENSOR(for RHD) INSTALLATION

PROCEDURE


  1. INSTALL ACCELERATION SENSOR BRACKET


    1. B002DYF

      Install the acceleration sensor bracket with the bolt and nut.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    2. B002E8X

      Attach the clip to connect the connector holder.

  2. INSTALL ACCELERATION SENSOR ASSEMBLY


    1. B002CQY

      Install the front acceleration sensor assembly with the 2 nuts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note


      • Do not drop the sensor. If it is dropped, replace it with a new one.

      • The acceleration sensor must not be placed upside down.

    2. Connect the connector.

    3. Return the floor carpet to its original position.

  3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  6. INSTALL INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  8. INSTALL FRONT DOOR OPENING TRIM COVER LH

    Click here

  9. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  10. INSPECT ADAPTIVE VARIABLE SUSPENSION SYSTEM

    Click here