ADAPTIVE VARIABLE SUSPENSION SYSTEM FAIL-SAFE CHART


  1. FAIL-SAFE CHART

    Adaptive Variable Suspension System
    DTC Chart Malfunction Item Fail-safe Operation Fail-safe Deactivation Conditions

    C1715

    C1716

    C1717

    		 Acceleration sensor circuit Control stops. Engine switch turned on (IG) after normal condition restored

    C1731

    C1732

    C1733

    C1734

    		 Absorber control actuator circuit Control stops. Engine switch turned on (IG) after normal condition restored
    C1781 Absorber control ECU (front acceleration sensor RH) Control stops. Engine switch turned on (IG) after normal condition restored
    C1782 Power source voltage Control stops. Engine switch turned on (IG) after normal condition restored
    C1783 Vehicle speed sensor circuit Control stops. Engine switch turned on (IG) after normal condition restored
    C1784 Steering angle sensor (spiral cable with sensor sub-assembly) Roll posture control is interrupted. Engine switch turned on (IG) after normal condition restored
    C1786 Master cylinder pressure circuit Control stops. Engine switch turned on (IG) after normal condition restored
    C1787 Yaw rate and acceleration sensor Roll posture control is interrupted. Engine switch turned on (IG) after normal condition restored
    C1789 Vehicle identification malfunction Control stops. Engine switch turned on (IG) after normal condition restored

    U0100

    U0101

    		 CAN communication system Continues damping force control. Engine switch turned on (IG) after normal condition restored
    U0122 CAN communication system Control stops. Engine switch turned on (IG) after normal condition restored

    U0124

    U0126

    		 CAN communication system Roll posture control is interrupted. Engine switch turned on (IG) after normal condition restored