ADAPTIVE VARIABLE SUSPENSION SYSTEM TERMINALS OF ECU


  1. CHECK ABSORBER CONTROL ECU (FRONT ACCELERATION SENSOR RH)

    B002CGPC14
    *a

    Component with harness connected

    (Absorber Control ECU (Front Acceleration Sensor RH))

    		 - -

    Tech Tips

    Inspect the connectors from the back side while the connectors are connected.

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    A50-1 (IGB) - Body ground B IG power supply Engine switch on (IG) 11 to 14 V
    A50-4 (GND) - Body ground W-B Ground Always Below 1 Ω
    A50-8 (CANH) - A50-7 (CANL) V - LG CAN communication line Engine switch off 54 to 69 Ω
    A50-14 (SGB1) - Body ground L Rear acceleration sensor power source Engine switch on (IG) 4.75 to 5.25 V
    A50-15 (SGB2) - Body ground R Front acceleration sensor LH power source Engine switch on (IG) 4.75 to 5.25 V
    A50-22 (SGG1) - Body ground LG Rear acceleration sensor ground Always Below 1 Ω
    A50-23 (SGS1) - Body ground Y Rear acceleration sensor Engine switch on (IG) 0 to 5 V
    A50-24 (SGG2) - Body ground BR Front acceleration sensor LH ground Always Below 1 Ω
    A50-25 (SGS2) - Body ground V Front acceleration sensor LH Engine switch on (IG) 0 to 5 V