| DTC Code | DTC Name |
|---|---|
| C2A01 | ECU Internal Power Source Circuit |
DESCRIPTION
This DTC is stored when the torque vectoring differential ECU assembly detects an abnormal voltage in its ECU internal power source for more than a certain period of time.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate |
|---|---|---|---|---|
| C2A01 | ECU Internal Power Source Circuit | Diagnosis Condition (1):
Diagnosis Condition (2):
Abnormal condition (1):
Abnormal condition (2):
Malfunction Time (1):
Malfunction Time (2):
Trip logic:
|
Torque vectoring differential ECU assembly |
|
*: Under abnormal condition (1), the warning light will not illuminate and no error message will be displayed on the multi-information display.
| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | Engine switch on (IG) | ○ | - |
| IG power source voltage is 10 V or more or PIG power source voltage is 10 V or more. | - | ○ | |
| Malfunction Status | PIG power source voltage is below 16 V and IG power source voltage is 18.5 V or more. | ○ | - |
| ECU internal power source malfunction. | - | ○ | |
| Detection Time | 3 seconds or more | 2 seconds or more | |
| Number of Trips | 1 trip | 1 trip | |
Tech Tips
DTC will be output when conditions for either of the patterns in the table above are met.
CAUTION / NOTICE / HINT
Tech Tips
If the torque vectoring differential ECU assembly has been replaced, perform "All Learning".
PROCEDURE
CHECK DTC OUTPUT (TVD)
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Enter the following menus: Chassis / TVD / Trouble Codes.
Check for DTCs.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Turn the engine switch off.
| A |
|
REPLACE TORQUE VECTORING DIFFERENTIAL ECU ASSEMBLY Click here |
| B |
|
GO TO DTC CHART Click here |
| C |
|
CHECK FOR INTERMITTENT PROBLEMS Click here |