TORQUE TRANSFER MODULE FLUID TEMPERATURE SENSOR INSPECTION

PROCEDURE


  1. INSPECT TEMPERATURE SENSOR (for RH Side)


    1. B002F0KC11
      *a

      Component without harness connected

      (Temperature Sensor (for RH Side))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (TMPR) - Body ground Always 10 kΩ or higher
      1 (TMPR) - 2 (TMGR) 0°C (32°F) to 155°C (311°F) 0.2 to 30.8 kΩ

  2. INSPECT TEMPERATURE SENSOR (for LH Side)


    1. A01QD0MC12
      *a

      Component without harness connected

      (Temperature Sensor (for LH Side))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (TMPL) - Body ground Always 10 kΩ or higher
      1 (TMPL) - 2 (TMGL) 0°C (32°F) to 155°C (311°F) 0.2 to 30.8 kΩ