TORQUE VECTORING DIFFERENTIAL SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / TVD / Trouble Codes.

    5. Check the details of the DTC(s).

      Click here


      Chassis > TVD > Trouble Codes

  2. CLEAR DTC (When Using GTS)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / TVD / Trouble Codes.

    5. Clear the DTCs.


      Chassis > TVD > Clear DTCs

  3. CLEAR DTC (Without Using GTS)


    1. Turn the engine switch off.

    2. Remove the TVD-AM fuse from the No. 1 engine room relay block for more than 60 seconds.

      Note


      • After repair of the torque vectoring differential system, make sure to clear the DTCs and check that no DTCs are output.

      • Make sure to diagnose the problem before clearing the DTCs by removing the TVD-AM fuse.