FUEL INJECTOR(for Port Injection) COMPONENTS
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | ENGINE WIRE | *2 | FUEL TUBE SUB-ASSEMBLY |
| *3 | INJECTOR DRIVER | *4 | INJECTOR DRIVER BRACKET |
| *5 | PURGE VALVE (PURGE VSV) | *6 | WATER BY-PASS PIPE SUB-ASSEMBLY |
| *7 | HEATER WATER OUTLET HOSE | *8 | HEATER WATER INLET HOSE |
| *9 | WATER BY-PASS HOSE | *10 | NO. 3 WATER BY-PASS HOSE |
| *11 | NO. 5 WATER BY-PASS HOSE | *12 | ENGINE ROOM ECU COVER |
| *13 | FUEL VAPOR FEED HOSE | *14 | NO. 1 FUEL VAPOR FEED HOSE |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | ENGINE WIRE | *2 | FUEL TUBE SUB-ASSEMBLY |
| *3 | INJECTOR DRIVER | *4 | INJECTOR DRIVER BRACKET |
| *5 | PURGE VALVE (PURGE VSV) | *6 | WATER BY-PASS PIPE SUB-ASSEMBLY |
| *7 | HEATER WATER OUTLET HOSE | *8 | HEATER WATER INLET HOSE |
| *9 | WATER BY-PASS HOSE | *10 | NO. 3 WATER BY-PASS HOSE |
| *11 | NO. 5 WATER BY-PASS HOSE | *12 | ENGINE ROOM ECU COVER |
| *13 | FUEL VAPOR FEED HOSE | *14 | NO. 1 FUEL VAPOR FEED HOSE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | FUEL DELIVERY PIPE SUB-ASSEMBLY | *2 | PORT FUEL INJECTOR ASSEMBLY |
| *3 | FUEL TUBE SUB-ASSEMBLY | *4 | NO. 2 FUEL TUBE SUB-ASSEMBLY |
| *5 | INJECTOR VIBRATION INSULATOR | *6 | NO. 1 DELIVERY PIPE SPACER |
| *7 | NO. 2 FUEL DELIVERY PIPE SUB-ASSEMBLY | *8 | EFI FUEL PIPE CLAMP |
| *9 | WIRE HARNESS BRACKET | *10 | NO. 6 ENGINE WIRE |
| *11 | NO. 7 ENGINE WIRE | *12 | O-RING |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | FUEL DELIVERY PIPE SUB-ASSEMBLY | *2 | PORT FUEL INJECTOR ASSEMBLY |
| *3 | FUEL TUBE SUB-ASSEMBLY | *4 | NO. 2 FUEL TUBE SUB-ASSEMBLY |
| *5 | INJECTOR VIBRATION INSULATOR | *6 | NO. 1 DELIVERY PIPE SPACER |
| *7 | NO. 2 FUEL DELIVERY PIPE SUB-ASSEMBLY | *8 | EFI FUEL PIPE CLAMP |
| *9 | WIRE HARNESS BRACKET | *10 | NO. 6 ENGINE WIRE |
| *11 | NO. 7 ENGINE WIRE | *12 | O-RING |
| *13 | UNION TO CHECK VALVE HOSE | - | - |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | - | - |