DRIVE BELT ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT FAN AND GENERATOR V BELT


    1. A01Q8MZ

      Check the fan and generator V belt for wear, cracks or other signs of damage.

      If any of the following defects is found, replace the fan and generator V belt.


      • The fan and generator V belt is cracked.

      • The fan and generator V belt is worn to the extent that the cords are exposed.

      • The fan and generator V belt has chunks missing from the ribs.

    2. A01QBL1C14
      *a Correct
      *b Incorrect

      Check that the fan and generator V belt fits properly in the ribbed grooves.

      Tech Tips

      Check by hand to confirm that the fan and generator V belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.