FUEL SYSTEM PARTS LOCATION
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | FUEL SENDER GAUGE ASSEMBLY | *2 | FUEL PUMP CONTROL ECU ASSEMBLY |
| *3 | NO. 2 FUEL SENDER GAUGE ASSEMBLY | *4 | FUEL TANK VENT TUBE ASSEMBLY |
| *5 | FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY | *6 | ECM |
| *7 | NO. 1 ENGINE ROOM RELAY BLOCK - P/I-B NO. 2 FUSE - F/PMP FUSE |
*8 | NO. 2 ENGINE ROOM RELAY BLOCK |
| *9 | NO. 3 ENGINE ROOM RELAY BLOCK - C/OPN RELAY - EFI MAIN NO 2 RELAY |
*10 | NO. 1 INTEGRATION RELAY - EFI MAIN RELAY - INJ1 RELAY - INJ2 RELAY - IG2 RELAY - EFI MAIN FUSE - IG2 MAIN FUSE - INJ FUSE - INJ1 FUSE - INJ2 FUSE |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | FUEL SENDER GAUGE ASSEMBLY | *2 | FUEL PUMP CONTROL ECU ASSEMBLY |
| *3 | NO. 2 FUEL SENDER GAUGE ASSEMBLY | *4 | FUEL TANK VENT TUBE ASSEMBLY |
| *5 | FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY | *6 | ECM |
| *7 | NO. 1 ENGINE ROOM RELAY BLOCK - P/I-B NO. 2 FUSE - F/PMP FUSE |
*8 | NO. 2 ENGINE ROOM RELAY BLOCK |
| *9 | NO. 3 ENGINE ROOM RELAY BLOCK - C/OPN RELAY - EFI MAIN NO 2 RELAY |
*10 | NO. 1 INTEGRATION RELAY - EFI MAIN RELAY - INJ1 RELAY - INJ2 RELAY - IG2 RELAY - EFI MAIN FUSE - IG2 MAIN FUSE - INJ FUSE - INJ1 FUSE - INJ2 FUSE |
ILLUSTRATION
| *1 | PORT FUEL INJECTOR ASSEMBLY | *2 | FUEL PRESSURE SENSOR |
| *3 | FUEL PUMP WITH SEAL SUB-ASSEMBLY (for Bank 1) | *4 | FUEL PUMP WITH SEAL SUB-ASSEMBLY (for Bank 2) |
| *5 | DIRECT FUEL INJECTOR ASSEMBLY | *6 | INJECTOR DRIVER |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | COMBINATION METER ASSEMBLY | *2 | CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
| *a | Refer to the Service Bulletin for the installation position of the parts. | - | - |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | COMBINATION METER ASSEMBLY | *2 | CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
| *a | Refer to the Service Bulletin for the installation position of the parts. | - | - |