ENGINE OIL TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE CENTER NO. 4 ENGINE UNDER COVER

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. DRAIN ENGINE OIL

    Click here

  6. DISCONNECT VENTILATION HOSE

    Click here

  7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  8. REMOVE RADIATOR RESERVE TANK ASSEMBLY

    Click here

  9. REMOVE ENGINE OIL TEMPERATURE SENSOR


    1. A01QBQ9

      Disconnect the engine oil temperature sensor connector.

    2. A01QACI

      Remove the engine oil temperature sensor from the oil filter bracket sub-assembly.

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine oil temperature sensor.