ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

    Tech Tips

    Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.



    1. Install a new gasket to the engine coolant temperature sensor.

    2. A01QCPTE01

      Using SST, install the engine coolant temperature sensor to the front water by-pass joint.

      SST
      09817-33191
      Torque:
      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

    3. Connect the engine coolant temperature sensor connector.

  2. ADD ENGINE COOLANT

    Click here

  3. INSPECT FOR COOLANT LEAK

    Click here

  4. INSTALL CENTER NO. 4 ENGINE UNDER COVER

    Click here

  5. INSTALL COOL AIR INTAKE DUCT SEAL

    Click here

  6. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  7. PERFORM INITIALIZATION


    1. Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.