ACCELERATOR PEDAL INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL

   
   

   1. Install the accelerator pedal with the 2 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

2. INSTALL ACCELERATOR PEDAL PAD

   
   

   1. Engage the 2 claws to install the accelerator pedal pad.

3. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

   Note

   
   

   • Avoid physical shock to the accelerator pedal sensor assembly.

   • Do not disassemble the accelerator pedal sensor assembly.

   • The accelerator pedal sensor assembly does not require lubrication.

   • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

   
   

   1. Assemble the tip of the rod to the accelerator pedal.

   2. Install the accelerator pedal sensor assembly with the 2 nuts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   3. Connect the accelerator pedal sensor assembly connector.