RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT EFI CIRCUIT OPENING RELAY ASSEMBLY (C/OPN RELAY)


    1. A01Q8J3N23

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the EFI circuit opening relay assembly (C/OPN RELAY).

  2. INSPECT EFI 2 RELAY (EFI MAIN NO. 2 RELAY)


    1. A01Q8J3N23

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the EFI 2 relay (EFI MAIN NO. 2 RELAY).

  3. INSPECT VVT RELAY (VVT RH RELAY)


    1. A01QCHCN01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the VVT relay (VVT RH RELAY).

  4. INSPECT VVT RELAY (VVT LH RELAY)


    1. A01QCHCN01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the VVT relay (VVT LH RELAY).