PROCEDURE
INSTALL HEATED OXYGEN SENSOR (for Bank 2)
| *a | Torque Wrench Fulcrum Length |
Using SST, install the heated oxygen sensor to the front exhaust pipe assembly.
Note
If the heated oxygen sensor has been struck or dropped, replace it.
Tech Tips
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 255 mm (10.2 in.)):
39 N*m (398 kgf*cm, 29 ft.*lbf)
Engage the heated oxygen sensor grommet to the vehicle body.
Engage the clamp.
Connect the heated oxygen sensor connector.
Install the floor carpet to the original position.
INSTALL HEATED OXYGEN SENSOR (for Bank 1)
| *a | Torque Wrench Fulcrum Length |
Using SST, install the heated oxygen sensor to the front exhaust pipe assembly.
Note
If the heated oxygen sensor has been struck or dropped, replace it.
Tech Tips
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 255 mm (10.2 in.)):
39 N*m (398 kgf*cm, 29 ft.*lbf)
Engage the heated oxygen sensor grommet to the vehicle body.
Engage the clamp.
Connect the heated oxygen sensor connector.
Install the floor carpet to the original position.
INSTALL CONSOLE BOX ASSEMBLY
INSPECT FOR EXHAUST GAS LEAK
PERFORM INITIALIZATION
Perform "Inspection After Repair" after replacing a heated oxygen sensor.
w/ Canister Pump Module:
w/o Canister Pump Module: