TRANSMITTER BATTERY INSTALLATION

PROCEDURE


  1. INSTALL TRANSMITTER BATTERY (for Type A)


    1. A01Q8TZC02
      B002C8N Install in this Direction

      Install a transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

      Note


      • Be sure that the positive (+) and negative (-) sides of the transmitter battery are matched correctly.

      • Do not to bend the electrodes while installing the transmitter battery.

      • Keep the interior of the transmitter housing case free of dust, water and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    2. A01QBQYC02
      B002C8N Install in this Direction

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    3. A01QBV6C03
      B002C8N Install in this Direction

      Insert the mechanical key as shown in the illustration.

    4. Press one of the transmitter switches and check that the LED illuminates.

  2. INSTALL TRANSMITTER BATTERY (for Type B)


    1. A01QBMKC01
      B002C8N Install in this Direction

      Install a transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

      Note


      • Be sure that the positive (+) and negative (-) sides of the transmitter battery are matched correctly.

      • Do not to bend the electrodes while installing the transmitter battery.

      • Keep the interior of the transmitter housing case free of dust, water and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    2. A01QBZVC01
      B002C8N Remove in this Direction

      Engage the claws to install the transmitter battery housing cover as shown in the illustration.

    3. A01QAUMC01
      B002C8N Install in this Direction

      Install the transmitter housing cover as shown in the illustration.

    4. A01QB92C01
      B002C8N Install in this Direction

      Insert the mechanical key as shown in the illustration.

    5. Press one of the transmitter switches and check that the LED illuminates.

  3. INSTALL TRANSMITTER (CARD KEY) BATTERY (for Card Type)


    1. A01QCJTC02
      B002C8N Install in this Direction

      Push in and install the transmitter (card key) battery (lithium battery: CR2412) while being careful of the following: 1) the orientation of the transmitter (card key) battery positive (+) and negative (-) terminals; and 2) being sure to insert the transmitter (card key) battery between the 2 terminals and deep into the card in the direction indicated by the arrow in the illustration.

      Note


      • Insert the transmitter (card key) battery so that its positive (+) side is facing the LEXUS mark.

      • Do not deform the terminals.

      • If the terminals are dirty, wipe the terminals with a soft cloth before installing the transmitter (card key) battery.

      Tech Tips

      Check if the card terminals are damaged or if the card interior has foreign matter.

    2. A01QD3PC02
      A01Q9UUC09 Install in this Direction

      Install the battery cover so that it clips onto the transmitter housing case as shown in the illustration.

      Note


      • Push on the battery cover until its attachment hooks attach securely.

      • When the battery cover is removed and installed many times, be careful as the battery cover may become loose.