TRANSMITTER BATTERY REMOVAL

CAUTION / NOTICE / HINT

Note

Take extra care when handling these precision electronic components.

PROCEDURE


  1. REMOVE TRANSMITTER BATTERY (for Type A)


    1. A01QCOZC02
      *1 Release Hook Knob
      B002DP3 Push
      B002C8N Remove in this Direction

      Push the release hook knob and extract the mechanical key as shown in the illustration.

    2. A01QB1OC02
      *a Protective Tape
      B002DP3 Turn in this Direction
      B002C8N Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, remove the transmitter housing cover as shown in the illustration.

    3. A01QCPXC02
      *a Protective Tape
      B002C8N Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery (lithium battery: CR2032) as shown in the illustration.

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter battery. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  2. REMOVE TRANSMITTER BATTERY (for Type B)


    1. A01Q99LC01
      *1 Release Hook Knob
      B002DP3 Push
      B002C8N Remove in this Direction

      Push the release hook knob and extract the mechanical key as shown in the illustration.

    2. A01Q9GVC01
      *a Protective Tape
      B002DP3 Turn in this Direction
      B002C8N Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, remove the transmitter housing cover as shown in the illustration.

    3. A01QBG0C01
      B002C8N Remove in this Direction

      Disengage the claws to remove the transmitter battery housing cover as shown in the illustration.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    4. A01QBG1C01
      *a Protective Tape
      B002C8N Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery (lithium battery: CR2032) as shown in the illustration.

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter battery. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  3. REMOVE TRANSMITTER(CARD KEY) BATTERY (for Card Type)


    1. A01Q954C02
      B002C8N Remove in this Direction

      Lightly hold and pull the battery cover out in the direction indicated by the arrow in the illustration.

      Note

      Do not insert a screwdriver, etc. between the case and battery cover and forcefully bend the battery cover. This will deform the battery cover.

      Tech Tips


      • If the battery cover is held too firmly, it becomes harder to pull out.

      • If the battery cover is slippery and it is difficult to pull it out, use non-slip gloves to pull the battery cover out.

    2. A01QAIPC02
      B002C8N Remove in this Direction

      Remove the transmitter (card key) battery (lithium battery: CR2412).