DRIVE BELT INSTALLATION

PROCEDURE


  1. INSTALL FAN AND GENERATOR V BELT


    1. A01QCJ4C01
      *1 Engine Water Pump Assembly
      *2 Scavenging Pump Assembly
      *3 No. 2 Idler Pulley Sub-assembly
      *4 Compressor with Pulley Assembly
      *5 Crankshaft Pulley
      *6 V-ribbed Belt Tensioner Assembly
      *7 Generator Assembly

      Install the fan and generator V belt as shown in the illustration.

    2. Rotate the V-ribbed belt tensioner assembly counterclockwise, and then remove the 5 mm bi-hexagon wrench.

      Tech Tips

      Check that the fan and generator V belt is properly set to each pulley.

    3. A01QBL1C21
      *a Correct
      *b Incorrect

      Start the engine and check that the fan and generator V belt turns smoothly and no abnormal noise occurs.

  2. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here