DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. REMOVE FAN AND GENERATOR V BELT


    1. A01Q8GP

      Release the fan and generator V belt tension by turning the V-ribbed belt tensioner assembly counterclockwise and remove the fan and generator V belt from the V-ribbed belt tensioner assembly.

      Tech Tips

      The pulley bolt for the V-ribbed belt tensioner assembly is reverse threaded.

    2. A01QCCMC01
      *a 5 mm Bi-hexagon Wrench
      *b Hole

      Rotate the V-ribbed belt tensioner assembly counterclockwise to align the holes and then insert a 5 mm bi-hexagon wrench to secure the V-ribbed belt tensioner assembly in place.

    3. Remove the fan and generator V belt.