SUSPENSION CONTROL SERVICE DATA

Front Acceleration Sensor (for LHD)
Tester Connection	Condition	Specified Condition
1 (SGFL) - 2 (SGG)	Sensor stationary	Approx. 2.3 V
1 (SGFL) - 2 (SGG)	Sensor vibrating vertically	Changes between approx. 0.9 and 3.6 V

Front Acceleration Sensor (for RHD)
Tester Connection	Condition	Specified Condition
1 (SGFL) - 2 (SGG)	Sensor stationary	Approx. 2.3 V
1 (SGFL) - 2 (SGG)	Sensor vibrating vertically	Changes between approx. 0.9 and 3.6 V

Rear Acceleration Sensor
Tester Connection	Condition	Specified Condition
1 (SGRR) - 2 (SGND)	Sensor stationary	Approx. 2.3 V
1 (SGRR) - 2 (SGND)	Sensor vibrating vertically	Changes between approx. 0.9 and 3.6 V

Absorber Control Actuator (for Front Side)
Tester Connection		Condition	Specified Condition
for LH Side	1 (FAL+) - 5 (FAL-)	15 to 25°C	2.0 to 2.2 Ω
for RH Side	1 (FAR+) - 2 (FAR-)	15 to 25°C	2.0 to 2.2 Ω

Absorber Control Actuator (for Rear Side)
Tester Connection		Condition	Specified Condition
for LH Side	1 (RAL+) - 5 (RAL-)	15 to 25°C	2.0 to 2.2 Ω
for RH Side	1 (RAR+) - 5 (RAR-)	15 to 25°C	2.0 to 2.2 Ω

Combination Switch
Tester Connection	Switch Condition	Specified Condition
3 (B) - 4 (GND)	Pressed	Below 10 Ω
3 (B) - 4 (GND)	Not pressed	10 kΩ or higher
7 (P) - 4 (GND)	Pressed	Below 10 Ω
7 (P) - 4 (GND)	Not pressed	10 kΩ or higher